Aqua V2 RBA is the latest rebuildable tank atomizer released from the famous modder Footoon, who has brought you the popular Originl Mod, Hades Mod, Aqua V1 atomizer and Cerebrus RDA. This new version is a revolutionary atomizer, which can be used as a Kayfun RTA with its 4ml tank capacity or switch it over to use as an RDA. It's an high end atty designed for different vaping demands. Here is the newest clone made in China, which will give the same vaping experiences as the original one.
The Aqua V2 comes a stainless steel tank, PMMA tank, and RDA top cap in a tin box. There are 4 wick channels milled on the deck which is ready for dual coil builds. Both the positve post and negative post are drilled with three throughholes for easliy to insert the wire legs.
The chamber of Aqua V2 atomizer shaped like a bell. There are 4 holes drilled on the inner chamber which can pass the eliquid to the wicks. And also you can fill the tank through those holes. The chamber also acting as the air flow control ring. Screw the chamber to get the best airflow to your builds.
There are two airflow choices when use the Aqua V2 as a dripper, you can choose to use the two adjustable cyclope airflow control on the side of the cap, or use the unadjuatable airflow on the side of the deck. Use them individually or together, all depends on your vaping demands.
It has an adjustable 510 connect pin, but you can also connect it in hybrid with M20x1 threaded mods. Remove the bottom cap, and remove the PMMA insulator, then remove the top cap of a M20x1 threaded mod, and connect the pin of atomizer directly to the positive post of battery to minimize voltage drop and best cloud producing.