X-Man 35 is a 26650 size high wattage stainless steel tube made by Ecigator. The mod support up to 35W to meet the demands of most of cloud chasers.
This is a mod that uses the REAL 7-35W chip wich is developed by Ecigator.. That means the PCBA in the mod can support up to 35W not only on the LED screen, but also the real output voltage and current. The original brand high drain 26650 battery is required for the mod if you run the high wattage, or the system will shut down automatically when you click the fire button.
The mod can work with 0.2-3ohm atomizers. It's known as 50-60W is better for 0.2ohm resistance, so here we suggest you use the resistance between 0.4 - 1.5ohm to get the best results. The chip also has the over - temperature protection and anti - access protection. It wil show "TOO HOT" on screen when the temperature if too high. And the device won't work if you reversed the battery.
There are 3 buttons on the body. The big one is the switch and fire button, the two small one is the adjust and lock button. Click the big button 5 times continuely to turn on / off the device, and click the big button when vaping. Use the small button to adjust wattage from 7w-35w. Click the two small button togeter for 5 seconds after you got the right wattage for your atomizers, and the setting will be locked. Unlock it with the same way.
Specification of X-man 35:
- Adjustable Wattage: 7-35W
- Working Resistance: 0.2-3ohm
- Working Battery: High Drain 26650 battery
- OLED Screen Display: resistance, output voltage, working wattage, puff counts
- Protection: Overload protection, over - temperature protection, anti - access protection, circuit protection.